culligan 2 用户手册

3

recharge, grasp the white outer 24-

hour dial J and rotate until the desired

recharge time on the dial is opposite

the dot. Note: Whenever the time of

recharge is changed, the time-of-day

setting must also be changed follow-

ing above instructions. (When you

reset time-of-day, double check to be

sure that the time of recharge is not

accidently changed in the process.)

The frequency of recharge was

preset for your expected family needs

when the water conditioner was

installed.

There are six stainless steel tabs on a

numbered wheel F which program

recharge. When all six tabs are

pushed in, the unit will recharge

every day; if every other tab is in,

recharge will occur every other day;

if two opposite tabs are in, recharge

will be every third day; and if only

one tab is in, recharge occurs every

sixth day.

Push IN to recharge, pull OUT to skip.

Has a dial E which controls the

pounds of salt used per recharge. This

was set at the time of installation.

Before making any changes, consult

your independently operated Culli-

gan dealer for advice on proper

setting, then make these adjustments:

Loosen screw A in the center of dial.

While holding cam gear stationery,

rotate the dial until desired salt

dosage in pounds is aligned with

mark D. Then tighten screw.

Used on SOFT-MINDER

®

 initiated

water conditioners. For information

regarding resetting of the number

of gallons between recharges,

contact your Culligan dealer.