Chevrolet avalanche 2002 用户手册

This feature allows you to use your high

-

beam

headlamps to signal a driver in front of you that you
want to pass. It works even if your headlamps are off.

To use it, pull the turn signal lever toward you, 
but not so far that you hear it click.

If your headlamps are off or on low

-

beam, your

high

-

beam headlamps will turn on. They’ll stay 

on as long as you hold the lever toward you and 
the high

-

beam indicator on the instrument panel 

cluster comes on. Release the lever to turn the
high

-

beam headlamps off.

You control the windshield wipers by turning the band
with the wiper symbol on it.

For a single wiping cycle, turn the band to MIST. 
Hold it there until the wipers start, then let go. 
The wipers will stop after one wipe. If you want 
more wipes, hold the band on MIST longer.

You can set the wiper speed for a long or short delay
between wipes. This can be very useful in light rain 
or snow. Turn the band to choose the delay time. 
The closer to LO, the shorter the delay.

For steady wiping at low speed, turn the band away
from you to the LO position. For high

-

speed wiping,

turn the band further, to HI. To stop the wipers, 
move the band to the OFF position.

Be sure to clear ice and snow from the wiper blades
before using them. If they’re frozen to the windshield,
carefully loosen or thaw them. If your blades do become
worn or damaged, get new blades or blade inserts.

There is a paddle marked with the windshield washer
symbol at the top of the multifunction lever. To spray
washer fluid on the windshield, push the paddle. 
The wipers will clear the window and then either stop 
or return to your preset speed.