Chevrolet avalanche 2002 用户手册
2-88
Luggage Carrier
You can load things on top of your vehicle with this feature.
The luggage carrier has slats and siderails attached to the
roof and crossrails which can be moved back and forth
to help secure cargo. Tie the load to the siderails or
siderail supports.
roof and crossrails which can be moved back and forth
to help secure cargo. Tie the load to the siderails or
siderail supports.
NOTICE:
Loading cargo that weighs more than 200 lbs.
(90.6 kg) on the luggage carrier may damage
your vehicle. When you carry large things, never
let them hang over the rear or the sides of your
vehicle. Load your cargo so that it rests on the
slats and does not scratch or damage the vehicle.
Put the cargo against the siderails and fasten it
securely to the luggage carrier.
(90.6 kg) on the luggage carrier may damage
your vehicle. When you carry large things, never
let them hang over the rear or the sides of your
vehicle. Load your cargo so that it rests on the
slats and does not scratch or damage the vehicle.
Put the cargo against the siderails and fasten it
securely to the luggage carrier.
Don’t exceed the maximum vehicle capacity when loading
your vehicle. For more information on vehicle capacity and
loading, see “Loading Your Vehicle” in the Index.
your vehicle. For more information on vehicle capacity and
loading, see “Loading Your Vehicle” in the Index.
To prevent damage or loss of cargo as you’re leaving,
check now and then to make sure the luggage and cargo
are still securely fastened.
check now and then to make sure the luggage and cargo
are still securely fastened.
Be sure the cargo is properly loaded.
D If small heavy objects are placed on the roof cut a
D If small heavy objects are placed on the roof cut a
piece of 3/8 inch plywood to fit inside the crossrails
and siderails to spread the load. If plywood is used,
tie it to the siderail supports.
and siderails to spread the load. If plywood is used,
tie it to the siderail supports.
D Tie the load to the crossrails or the siderail supports.
Use the crossrails only to keep the load from sliding.
To move the crossrails, pull out on the latch release
handle at each end. Slide the crossrail to the desired
position balancing the force side to side. Push the
release handle back into the latched position and
slide the crossrail back and forth slightly to be sure
the latch snaps securely into place.
To move the crossrails, pull out on the latch release
handle at each end. Slide the crossrail to the desired
position balancing the force side to side. Push the
release handle back into the latched position and
slide the crossrail back and forth slightly to be sure
the latch snaps securely into place.
D If you need to carry long items, move the
crossrails as far apart as they will go. Tie the load
to the crossrails and the siderails or siderail supports.
Also tie the load to the bumpers. Do not tie the load
so tightly that the crossrails or siderails are damaged.
to the crossrails and the siderails or siderail supports.
Also tie the load to the bumpers. Do not tie the load
so tightly that the crossrails or siderails are damaged.
D After moving a crossrail, be sure it is securely locked
into the siderail.
Your vehicle has a Center High
-
Mounted Stoplamp
(CHMSL) located above the rear glass.
If items are loaded on the roof of the vehicle, care should
be taken not to block or damage the CHMSL unit.
be taken not to block or damage the CHMSL unit.