Chevrolet 2010 corvette convertible 用户手册
To recall a memory position:
.
On vehicles with an automatic transmission, press
and release the desired button.
and release the desired button.
If the vehicle is in P (Park), a single beep sounds
and the memory position is recalled after a brief
delay.
and the memory position is recalled after a brief
delay.
If the vehicle is not in P (Park), three beeps sound
and the memory position is not recalled.
and the memory position is not recalled.
.
On vehicles with a manual transmission, when the
vehicle is on, the parking brake needs to be set to
recall the memory position. Press and release the
desired button.
vehicle is on, the parking brake needs to be set to
recall the memory position. Press and release the
desired button.
A single beep sounds and the memory position is
recalled after a brief delay.
recalled after a brief delay.
If the vehicle is on and the parking brake is not set,
three beeps sound and the memory position is not
recalled.
three beeps sound and the memory position is not
recalled.
For vehicles with the Auto Memory Recall, see “Auto
Memory Recall” under DIC Vehicle Personalization on
page 4‑71 for more information.
Memory Recall” under DIC Vehicle Personalization on
page 4‑71 for more information.
To stop recall movement of the memory feature, press
one of the power seat controls, power mirror or memory
buttons, or the telescopic steering column switch.
one of the power seat controls, power mirror or memory
buttons, or the telescopic steering column switch.
Easy Exit Seat
B (Easy Exit Seat) : This button is used to program
and recall the desired driver's seat exit position.
and recall the desired driver's seat exit position.
To program an exit position:
1. Recall the desired driving position by pressing
button 1.
2. Adjust the seat and the telescopic steering column
position to a comfortable exit position.
3. Press and hold the exit button until two beeps
sound to let you know that the exit position is
now programmed.
now programmed.
A second exit position can be programmed by repeating
the above steps and pressing button 2.
the above steps and pressing button 2.
To recall an exit position:
.
On vehicles with an automatic transmission, the
vehicle needs to be in P (Park).
vehicle needs to be in P (Park).
.
On vehicles with a manual transmission, the
parking brake must be set.
parking brake must be set.
B
: Press to recall an exit position.
One beep will sound and the exit position for the
currently identified driver will be recalled.
currently identified driver will be recalled.
For vehicles with the Auto Exit Recall, see “Auto Exit
Recall” under DIC Vehicle Personalization on
page 4‑71 for more information.
Recall” under DIC Vehicle Personalization on
page 4‑71 for more information.
2-5