Husqvarna FS 413 用户手册

  A grease  

 

  fitting allows lubrication of Blade Depth Control  

 

  (EE) screw.  To access this grease fitting:

•  Raise the Diamond Blade (H) to maximum height.  
Open Tool Compartment (BB), temporarily remove opera-
tion manual bag.
•  Grease fitting (X) is located near top of Blade Depth 
Control (EE) Tube.
•  Add Grease to the fitting.  Raise and lower the machine 
a few times to circulate the grease through the tube.

•  Replace Operation Manual Bag, close Tool Compart-
ment (BB) door.

 

 Check that engine oil level is correct.

 

 Engine Oil Dipstick (Z) is located on front of  

 

 engine. Refill engine oil in dipstick hole. When  

 

 checking oil level, Engine Oil Dipstick (Z) should  

 

 not be screwed in.

Because engine often operates at an angle, check oil 
level with engine horizontal. Check frequently to ensure 
that oil level never falls below lower mark on dipstick. 
0W0 oil is recommended.

See engine operation manual for more information.

•  Turn machine Start Switch (DD) to OFF (0) position.  
Let engine cool.  Use Depth Control (EE) to tilt machine 
slightly backwards.

•  Reposition Oil Drain Hose (NN) to side of machine.  
Set a suitable container, large enough to hold engine oil 
capacity, beside machine to catch oil.

•  Open end of Oil Drain Hose (NN), and let oil drain into 
container.  After oil is drained, replace Oil Drain Hose 
(NN) end, tighten securely, return hose to original position. 

•  Fill engine with recomended quantity of oil - see engine 
manual for details.

•  Dispose of used oil in an environmentally safe manner.