Hitachi VM-8400LA 用户手册

TROUBLESHOOTING 

 

57

The "

" indication in the electronic viewfinder 

flashes to indicate battery is discharged.  

Try another battery or charge the battery. 

 

Power is not turned on and no button 
operations are accepted. 

Remove the power source and after about 
one minute, push the reset switch gently using 
a toothpick, etc. until you feel a click. Since 
this erases the date, time and other customer 
preferred features, reset them again. 

.  

“PLAY” cannot be engaged.   

Set “CAM/OFF/VIDEO” to VIDEO position.   

No picture appears on television screen when 
“PLAY” is pressed. 

Set the television to the camcorder channel  
(3 or 4) depending upon the selected channel 
on the RF channel select switch of RF 
converter unit. 

 

Set “AV IN/OUT” switch to “OUT” position. 

Interference on playback picture. 

Adjust the tracking using “TRACKING” control 
(power zoom switch)> 

 

When you see the playback picture on your 
TV, adjust fine tuning knob on television set to 
obtain best picture. 

 

The pre-recorded tape is EP or LP recording.  
This camcorder is for use in SP recording 
only. 

Picture bends at the top of the TV screen. 

TV receiver is of older type it needs to be 
modified to work properly with camcorder. 

 

Tape is damaged.  Try another cassette. 

Color of your TV screen is too bright, too faint 
or change. 

TV set has VIR circuit.  Turn off during 
playback.