Garmin gpsmap 2006, 2010 用户手册

41

F

Plan— The Route Review and Active Route pages also display trip-planning information for each leg or 
the entire route. By entering your estimated speed, Fuel Flow, Departure Date and Time, the unit will 
calculate your trip information and display it in the data fi eld on the far right of the Route Review and 
Active Route pages. Available information includes ETA, Fuel (to point), Leg Distance, Leg Fuel, Leg 
Time, Sunrise and Sunset (at point location) and Time To (point). Distance and Course between legs will 
automatically be displayed for all route points. 

1.  To select the desired planning fi gure, highlight the desired route from the Route List and press 

ENTER/MARK to display the Route Review page or you if you are already on an active route, press PAGE 
or QUIT until the Active Route Page is displayed.

2.  One of eight available data types appears to the far right of each route point along with the distance and 

course. Use the LEFT/RIGHT keys on the ARROW KEYPAD to cycle through the data types.

3.  To enter planning information, from the Route Review Page only, press the ‘Plan’ SOFT KEY. Enter the 

fi gures for Speed, Fuel Flow, Departure Time, and Departure Date. Press QUIT to return to the Route 
Plan Page.

Fuel fl ow rates on your unit are measured in “units per hour”. System setting changes 
for units of measure (statute, nautical or metric) do not affect the fuel fl ow measure. You 
should enter fuel fl ow rates based upon available information for your vehicle (operator’s 
manual, performance specifi cations, etc.) and make note of the desired units of measure 
(gallons, liters, etc.).