bk ck1.1 开发者指南
8 Programming additional delay in the macro is sometimes necessary. Each macro step usually takes some
time, so there may be enough built in delay for the television and the receiver to both be fully active by
the time the input commands are sent. Sometimes the component is not fully awake. It is fashionable for
many modern televisions and receivers to require 5 or more seconds of warm up time before they are
responsive to new commands. In a case like that, you will need to add more delay between steps.
the time the input commands are sent. Sometimes the component is not fully awake. It is fashionable for
many modern televisions and receivers to require 5 or more seconds of warm up time before they are
responsive to new commands. In a case like that, you will need to add more delay between steps.
Select the Delay icon
Now, click on the preset amount of delay or enter any time between .1
second and 30 seconds in the “Customize” window.
second and 30 seconds in the “Customize” window.
The new step appears in the list.
Now, drag the delay step to the correct location.
TIP - Sometimes a change in order can provide the delay you need.
31
Type in Section Title
S
B
I M P LY
E T T E R !
B K
&
T
H
E
B
&
K
A
U
T
O
M
A
T
E
D
H
O
U
S
E
Programming Tutorial