Konica Minolta bizhub 130f um pcl 1-1-0 用户手册
2
Installation
2-18
130f PCL driver
2.3
Network install: TCP/IP (option)
Note
The optional network interface card is required.
The optional network interface card is required.
2.3.1
Making connection
Note
Use an Ethernet
Use an Ethernet
®
cable with two twisted wire pairs and an RJ45 plug.
1
Turn off the machine.
2
Connect your Ethernet cable to the network port of your machine, and
the other end of the cable to the network port.
the other end of the cable to the network port.
3
Turn on the machine.
2.3.2
The IP Address
An IP address is required to install the network printer drivers. You need
to obtain the IP address from your network administrator and enter it by
following procedures.
to obtain the IP address from your network administrator and enter it by
following procedures.
1
Press [Menu], [6], [1], [1], [Enter].
2
Use the numeric keys to enter the IP
address.
Use [*] or [)] to move the cursor. Press [Cancel] if you want to delete
a digit.
address.
Use [*] or [)] to move the cursor. Press [Cancel] if you want to delete
a digit.
3
Press [Enter].
4
If necessary, change the subnet
mask.
mask.
5
Press [Enter], then press [Reset] to return to standby.
6
To effect the IP address setting, turn the machine off and then back on.
IP Address
192.168. 1. 10
192.168. 1. 10
Subnet mask
255.255.255. 0
255.255.255. 0