Hitachi c43wp910tn 用户手册

aerial, satellite and VCR installation

VHS video equipment should be connected to the AV2 scart  socket located at the rear of your TV. A

dedicated program number may be assigned to AV2, allowing you easier access to view external equipment

broadcasts. How to assign an AV signal to dedicated program numbers is explained in Signal Source Entry.

Please Note: - If you have not already done so, please read  television safety

before connecting your  television and external equipment.

insert plug...

...and switch on

A scart lead should be fitted between your TV and VCR to enhance your picture and sound quality.

Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your

equipment. These leads can also be purchased from your Hitachi dealer  or any good electrical retailer.

connect VCR ‘out’ to analogue
TV socket ‘in’ marked

(this should be plugged 

into a mains socket)

connect aerial

connection lead  to

the analogue‘in’ socket

marked 

1

3

(this should be 

plugged 

into a mains 

socket)

connect Satellite ‘out’ to VCR

socket ‘in’ marked

2

To avoid picture interference it is recommended that connection cables are kept from the right hand

side of the rear of the TV.

Before you switch on your television, it is important that the external speakers supplied

with your television are connected. This can be seen in the section other equipment

connection - rear socket and scart details