Garmin gps 76 用户手册

53

53

‘Backlight Timeout’ — 

Sets the time that the Backlight will remain on once 

activated.  The options are ‘Stays On’, ‘15 Seconds’, ‘30 Seconds’, ‘1 Minute’ 
and ‘2 Minutes’.

 This setting determines when the Beeper is used.  The options are 

‘Key and Message’, ‘Message Only’, and ‘Off’. 

The ‘Time’ Tab contains settings for Time Format, Time Zone, Daylight Sav-

ings Time, Current Date, and Current Time.  To change a setting, highlight the 
fi eld then press ENTER.  Make your selection then press ENTER to activate 
the selection.

 Using this setting you can have the GPS 76 display time in 

a 12 or 24 hour format. 

The ‘Time Zone’ setting has nine options, Atlantic, Eastern, 

Central, Mountain, Pacifi c, Alaska, Hawaii, Samoa, and Other.  If you choose  
‘Other’ a new fi eld “UTC Offset” will be displayed.  Enter the correct offset for 
your Time Zone.  You can fi nd a chart with UTC Offsets in Appendix C.

Has three options, ‘Yes’, ‘No’, and ‘Auto’.  If you 

select ‘Auto’, the unit will automatically determine when Daylight Savings 
Time should be displayed.  If you select ‘Yes’, Daylight Savings Time for the 
current location will be displayed.  If you select ‘No’, Daylight Savings Time 
will not be displayed.  If you have ‘Other’ selected in the ‘Time Zone’ fi eld, this 
option will not be available and Daylight Savings Time will be off.

 This fi eld shows the current date as determined by the unit, 

it is not accessible by the user.

This fi eld shows the time at the current location. This fi eld 

refl ects any settings in the ‘Daylight Savings Time’ fi eld, and is not accessible 
by the user.

190-00229-00.indd

07/25/01, 11:23 AM

53