ONKYO dv-sp1000 用户手册

32

Connecting—Continued

This section shows how to connect the DV-SP1000/
DV-SP1000E to a TV fitted with a SCART socket. 
SCART is a convenient connection format because it 
carries video (RGB, S-Video, composite) and stereo ana-
log audio all in a single cable. If your TV has a Dolby Pro 
Logic decoder built-in, with a SCART connection you’ll 
be able to enjoy DVDs that bear the Dolby Surround 
logo.
Use the supplied SCART cable to connect the 
DV-SP1000/DV-SP1000E’s AV CONNECTOR to a 
SCART socket on your TV.

Notes:
• The DV-SP1000/DV-SP1000E’s SCART socket can 

output RGB, S-Video, or composite video. The default 
setting is composite video. If your TV’s SCART 
socket supports RGB or S-Video (check your TV’s 
manual), you can change this setting and enjoy better 
picture quality (see page 74).

• See the tables on page 27 for details on how the 

DV-SP1000/DV-SP1000E outputs video and audio 
from its SCART socket.

This section shows how to connect the DV-SP1000/
DV-SP1000E to a AV receiver, HDTV, or projector that 
has an HDMI input socket.

HDMI (High Definition Multimedia Interface) is a new 
connection format that can carry uncompressed, stan-
dard or high definition digital video and up to eight chan-
nels of digital audio. Until now, several separate video 
and audio cables have been required to connect AV com-
ponents together. With HDMI, a single cable is all that’s 
necessary to achieve the best picture and audio quality.
HDMI video is compatible with DVI (Digital Visual 
Interface). To send HDMI video to a DVI input requires 
an HDMI-to-DVI cable. The DV-SP1000/DV-SP1000E 
supports HDCP (High-bandwidth Digital Content Pro-
tection), and for an HDMI-to-DVI connection to work, 
the other component must also support it. Note that this 
may not work with some DVI components.

Use the supplied HDMI cable to connect the 
DV-SP1000/DV-SP1000E’s HDMI OUT to an HDMI 
input on your AV receiver. Alternatively, you can connect 
the DV-SP1000/DV-SP1000E directly to the HDMI 
input on your TV.

Notes:
• Use the Digital Out/Digital 2 settings to match the 

HDMI output format with your HDTV (see page 75).

• The DV-SP1000/DV-SP1000E supports HDCP 

(High-bandwidth Digital Content Protection), a pro-
tection system for digital video. HDMI components 
that you connect to the DV-SP1000/DV-SP1000E 
must also support HDCP.

SCART cable 
(supplied)

HDMI cable 
(supplied)

Signal flow