Manualsbrain.com
  1. 份说明书
  2. 个品牌
  3. Oricom
  4. mi40
  5. 用户手册

Oricom mi40 用户手册

下载
页码 共 36
41 of 72 
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
• 
Press
.  
• 
Use 
 to scroll until the display reads RING DELAY. 
• 
Press
. The current ring delay will be displayed. 
• 
Use 
 to select among ECONOMY, RING2 to RING7. 
• 
Press 
 to confirm the selection and exit to RING DELAY. 
 
 
Alert Tone 
 
When the alert tone is set to ON, a short beep will be emitted once 
every minute from the handset speaker during standby when there is 
at least one new ICM or new memo on the answering machine. 
 
• 
Press 
 to enter the menu mode  
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
• 
Press
. 
• 
Use 
 to scroll until the display reads ALERT TONE. 
• 
Press
. The current setting is displayed. 
• 
Use 
 to select ON or OFF. 
• 
Press 
 to confirm the selection. 
 
Note: This feature is handset dependent.  You may turn this feature 
on and off on each handset registered to the system. 
 
 
 
 
 
42 of 72 
Message Length 
 
User can specify the maximum duration of the message (ICM) or 
memo that can be recorded. There are two choices of message 
length: 1 minute or 2 minutes. 
 
• 
Press 
 to enter the menu mode  
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
• 
Press
. 
• 
Use 
 scroll through the menu until the display reads MSG 
LENGTH. 
• 
Press
.  The current message length will be displayed. 
• 
Use 
 to select one of the two choices. 
• 
Press 
 to confirm the selection and exit to MSG LENGTH. 
 
 
Speaker Filtering 
 
Speaker Filtering is to allow all calls to be listened on the speaker of 
handsets #1.  Once activated, handsets #1 speaker will be turned on 
automatically when the answering machine answers the call. User will 
be able to hear the OGM and ICM recording from handset #1 speaker.  
 
• 
Press 
 to enter the menu mode  
• 
Use 
 scroll through the menu until the display reads ANSWER 
MAC. 
• 
Press
. 
• 
Use 
 scroll through the menu until the display reads SPK 
FILTER. 
• 
Press
. The current setting will be displayed. 
• 
To activate speaker filtering,