Hitachi DZ-BD10HA 用户手册
50
V
a
rious Recor
d
ing
Te
chniques
Turning OIS Off/On
Turning Face Detection On/Off
Using the Optical
Image Stabilizer (OIS)
OIS corrects camera movement
automatically.
automatically.
1
During recording pause, press
MENU
MENU
.
2
Select “Camera Functions
Setup”
Setup”
“OIS”
“On”/“Off”
3
Press the confirmation button
to confirm, then MENU to end.
When the function is turned On,
“
to confirm, then MENU to end.
When the function is turned On,
“
” appears in the LCD
monitor (p.31).
• OIS is retained in memory
• OIS is retained in memory
even when the power is turned
off.
off.
• If “Off” is selected, be sure to
return the setting to “On”
afterwards, if you do not
normally use a tripod, etc.
afterwards, if you do not
normally use a tripod, etc.
Notes
• It may be difficult to perform this
setting in dark places. Also if the
zoom bar is positioned in the digital
range (p.32), you may not be able to
set the white balance. If white balance
settings cannot be accomplished,
“
zoom bar is positioned in the digital
range (p.32), you may not be able to
set the white balance. If white balance
settings cannot be accomplished,
“
” will continue to flash.
• If the “Set” settings are not completed
within a few moments, the camcorder
returns to recording pause mode and
“
returns to recording pause mode and
“
” flashes in the LCD monitor.
Redo the settings from step 1.
HDD
BD-R RAM -RW (VR)