GE 28031 series 用户手册

Do Not Disturb (DND)

This feature allows you to turn off all the handset ringer(s) at once,by

pressing one button at the base unit, even though the ringer volume of

handset(s) has been set to HIGH or LOW.
1. In the standby mode, press the DO NOT DISTURB button on the base.
. The DND indicator will light and

DO NOT DISTURB shows in each

handset display.

3. To cancel, press the DO NOT DISTURB button again.

NOTE: You can press the DO NOT DISTURB button and

activate the function immediately, even when there is

incoming call ringing in, or during call screening after the

call is taken by the answerer.

Room Monitor

(This is only applicable when or more handsets are registered to the

same base unit.

IMPORTANT NOTE: The following procedures can ONLY be

done with Model 28011 and 28041 handsets.

1. Make sure your handset and the handset to be monitored are not in

talk mode.

. Press the MENU button and use the 6 or 5 button to scroll to

ROOM

MONITOR.

3. Press the SELECT button and all the registered handset numbers and

handset names show on the display.

4. Use the 6 or 5 button to select the desired handset. Press the SELECT

button to confirm.

If handset 1 is the room monitoring initiator, the following displays will be

shown during the room monitor:

HANDSET 1

ROOM MONITOR

HANDSET 2

FROM

HANDSET 1

ROOM MONITOR

Originating Handset

Receiving Handset

NOTE:
1) If handsets have been named, then the name will be

displayed on the LCD instead of handset numbers.
2) During the room monitoring, it will emit a beep tone if

there are incoming calls. You may press the TALK/CALL

BACK button or SPEAKER button to answer the call and quit

the room monitor mode.