Hitachi c14d24 用户手册

GB    - 19 -

Via 

Aerial 

Input

If you want to connect to your TV, peripherals

like video recorders or decoders, but the de-

vice  you  want  to  connect  does  not  have

Euroconnector, you should connect it to the

aerial 

input of your TV set.

Decoder

Cable  TV  offers  you  a  wide  choice  of

programmes.  Most  of  them  are  free,  others

are to be paid for by the viewer. This means

that you will need to subscribe to the broad-

casting  organisation  whose  programmes

you  wish  to  receive.  This  organisation  will

supply you a corresponding decoder unit to

allow the programmes to be unscrambled.
For further information ask your dealer. See

also the booklet supplied with your decoder.
Connect a decoder with an aerial socket

to the TV
• Connect the aerial cable.
Connect a decoder without an aerial

socket to the TV
• Connect the decoder to your TV with a

eurocable (RCA Jack Cable) to SCART

(RCA Jack). When your decoder has a Euro-

connector / RCA Jack you can obtain better

picture quality if you connect a eurocable

(RCA Jack Cable) to SCART (RCA Jack).

TV and Video Recorder

• Connect the aerial cables.
Better picture quality can be obtained if you

also connect a eurocable to  F-AV  /  SCART

socket.

Playback NTSC

Connect NTSC VCR player to F-AV / SCART

of the TV.
Then,  press  “

$9

”  button  to  select  DVD,

AV-1, F-AV, RGB.

Search for and store the test signal

of the video recorder

• Unplug the aerial cable from the aerial

socket  “ANT” of your video recorder.

• Switch on your TV and put the video recorder

on the test signal. (See the handbook for

your video recorder.)

• Enter the Tuning menu via the Install menu.
• Search for the test signal of your video re-

corder in the same way as you searched for

and stored the TV signals. See Tuning,

Search and Store TV channels. Store the

test signal under programme number 0.

• Replace the aerial cable in the aerial socket

“ANT” of your video recorder once you have

stored the test signal.

Camera and Camcorder

To connect to Front-AV input (F-AV):
Connect  your  camera  or  camcorder  F-AV  /

SCART of your TV.
• Connect your equipment to the TV via VIDEO,

AUDIO R and AUDIO L inputs. You should

connect the jacks to the input in the same

colour.

Connect the decoder to the video

recorder

Some  video  recorders  have  a  special

euroconnector for decoder.
• Connect a eurocable to the euroconnector of

your decoder and to the special eurocon-

nector of your video recorder. See also the

handbook of your video recorder.

• To connect your video recorder to the TV, see

TV and Video Recorder section.

If  you  want  to  connect  more  equipment  to

your TV, consult your dealer.