GE 25203 用户手册

5.   Connect the handset cord:
Plug one end of the coiled handset cord into the side of the base and 

the other end into the jack on the handset, and place the handset in 

the cradle.
6.   Check for a dial tone. Lift the handset and listen for a dial tone. If 

you hear a dial tone, the phone is properly installed.

1.  Turn the phone over so that the bottom of the base is facing up 

and the end with data port and line jacks is pointing away from 

you.

2.  Turn the desktop pedestal so that the side with four rectangle 

rubber feet is facing you.

3.  Insert the tabs on the pedestal into the two lower slots on the 

bottom of the base, then push the pedestal downward until the 

tabs on the top of the pedestal snap (lock) into place.