GE wbvh6240 用户手册

19

• Separate lint producers from lint collectors.

• Select a lower soil level.

• Try a liquid detergent.

• Use warmer water temperature.

• Wash drum may be fully loaded with loosely added items.

• Check fabric softener package for instructions and follow 

directions for using dispenser.

• The washer executes a check every time the washer is

started. Washer locks, rocks basket, and then unlocks for 
ten seconds to ensure safe operation.

• Make sure cord is plugged securely into a working outlet.

• Turn both hot and cold faucets fully on.

• Check house circuit breakers/fuses. Replace fuses or 

reset breaker. Washer should have separate outlet.

• Hold START/PAUSE button to start cycle.

• Close door and press START/PAUSE.

• If door is locked with START/PAUSE blinking, press 

START/PAUSE two times to unlock the door.

• Make sure door is closed.

• Washer motor will stop if it becomes overheated. It will 

automatically restart after a cool down period of up to 
30 minutes (if washer has not been manually turned off).

• Washer has detected excessive unbalance and will 

automatically attempt to rebalance load.

• Make sure washer is level and rests firmly on the floor.

• Press START/PAUSE to stop the washer, open the 

door and redistribute the load evenly. Close the door 
and restart.

• Washer is overloaded. Stop washer and reduce load.

• See Installation Instructions for directions to remove

shipping bolts and foam block.

• Check drum for foreign objects. Turn items with 

metal fasteners inside out.