Corsair CM2X1024-8500C5D 产品宣传页
www.corsair.com
The Dominator Series Twin2X2048-8500C5D is a 2048 MByte matched pair of DDR2 SDRAM
DIMMs built using Corsair’s latest high performance heat sink with Dual-Path Heat Xchange
(DHX) technology. This part delivers outstanding performance in the latest generation of
dual-channel DDR2-based motherboards. It has been tested extensively in multiple DDR2
motherboards to ensure compatibility and performance at its rated speed. This memory has
been verified to operate at 1066MHz at latencies of 5-5-5-15. Performance of these modules
incorporating DHX can be further enhanced by using the optional Dominator Airflow Fan, for
even more cooling and protection.
DIMMs built using Corsair’s latest high performance heat sink with Dual-Path Heat Xchange
(DHX) technology. This part delivers outstanding performance in the latest generation of
dual-channel DDR2-based motherboards. It has been tested extensively in multiple DDR2
motherboards to ensure compatibility and performance at its rated speed. This memory has
been verified to operate at 1066MHz at latencies of 5-5-5-15. Performance of these modules
incorporating DHX can be further enhanced by using the optional Dominator Airflow Fan, for
even more cooling and protection.
TWIN2X2048-8500C5D
Every part is tested in Corsair's factory at 1066MHz, but your actual results may vary depending on the overclocking margin of your CPU and motherboard. Newer motherboards may be
used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater performance. RAM used on the module may
change without notice. © August 2007 Corsair Memory, Inc.
used for production test as they become available. Corsair may periodically update the part with newer RAM revisions of same or greater performance. RAM used on the module may
change without notice. © August 2007 Corsair Memory, Inc.
FEATURES
2048 Megabytes of DDR2 memory
Two matched CM2X1024-8500C5D modules
Using DHX technology providing maximum cooling
Performance can be enhanced if optional
Dominator Airflow Fan is used
Enhanced Performance Profiles allow
automatic overclocking to aggressive
performance settings
100% tested at 1066MHz in high performance
DDR2 motherboards
Lifetime warranty
TEST SPECS
Each module pair is tested together at 1066MHz
Tested and packaged in pairs
Packaged together immediately following
system test
Tested at latency settings (5-5-5-15-2T) at 2.1V
at 1066MHz
SPD programmed at:
JEDEC standard 5-5-5-18 values at 800MHz
EPP: 1066 MHz, 5-5-5-15-2T, 2.1V
Dual-path Heat Xchange Diagram
• Optimized fins to maximize ambient airflow through the module array
• Extruded aluminum heat sinks to maximize convective heat dissipation
• Dedicated PCB heat sink