Grandstream Networks GXP14XX 用户手册
GRANDSTREAM GXP21XX/GXV3140/GXV3175 SERIES PHONES
20-BD5320-00
©
2011 GRANDSTREAM
PAGE 16 OF 45
4.2
Subscriber Level Configuration Parameters
This section identifies the device-specific parameters, including registration and
authentication. These settings must be unique across devices to be matched with the
settings for a BroadWorks subscriber.
authentication. These settings must be unique across devices to be matched with the
settings for a BroadWorks subscriber.
Provisioning a subscriber to register with BroadWorks allows calls to terminate to the
subscriber’s line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
subscriber’s line. Registration requires that a unique address of record (AoR) is
provisioned on BroadWorks and the phone; provisioning an AoR on BroadWorks consists
of setting the line/port parameter to a unique value within the Application Server cluster.
Grandstream GXP21xx/GXP14xx/GXV31xx each supports different numbers of SIP
accounts. The following example shows how to configure subscriber elements for an
account.
accounts. The following example shows how to configure subscriber elements for an
account.
Step
Command
Purpose
Subscriber Configuration Items
Step 1
Enable each line to be used.
Account Active = "Yes" ;
Enable a line of
GXP21xx/GXP14xx/GXV31xx in use.
GXP21xx/GXP14xx/GXV31xx in use.
Step 2
Set display name for each
line.
line.
Example:
Account Name = "BroadSoft" ;
For each line, configure the SIP Account
name to be displayed on the phone.
name to be displayed on the phone.
Step 3
Set Register User ID for
each line.
each line.
Example:
SIP User_ID = "2405551111" ;
The register user ID must correspond with
the line/port setting on BroadWorks.
the line/port setting on BroadWorks.
Step 4
Enable SIP Authentication
for each line.
for each line.
Example:
Authenticate ID =
"1111@as.mycompany.com" ;
"1111@as.mycompany.com" ;
Authenticate Password =
"welcome" ;
"welcome" ;
If the Authentication service is configured
on BroadWorks, these parameters must be
configured to match the BroadWorks
settings.
on BroadWorks, these parameters must be
configured to match the BroadWorks
settings.
Step 5
Configure caller ID name for
each line.
each line.
Example:
Name = “Claire Smith” ;
Configure the caller ID name for each line.
Subscriber BLF Configuration Items (GXP21xx only)
Step 1
Configure eventlist BLF for a
line.
line.
Example:
eventlist BLF URI =
“BLF2405551111”;
“BLF2405551111”;
Configure eventlist BLF under Account
Settings page.
Settings page.