Omega fl46300 用户手册

R

The FL463300 Series of in-line 

              

flowmeters offers individual, handmade        
quality, combined with excellent

               

accuracy and repeatability.                            

These flowmeters are machined of high           
Quality acrylic rod stock, carefully                
Polished to a clear-as-glass finish. Easy                
To read scales are screen printed on the        
Meter body. Adapters are glass filled                 
Polypropylene, and O-ring seals are             
Viton®.

Accuracy: ±5%
Meter Construction: Acrylic body  
O-ring Material: Viton®
Float: 316SS (PVC for Fl46302)
Temperature Limit: 65°C (150

°F) at

0 psig 
Pressure Limit: 150 psig at 21

°C (70°F) 

Pressure Drop: 2.0 psi max.

Dimensions: FL46301-06:208 H x 32 
Mm D (8-3/16 x 1-1/4”); FL46307-09: 279 H x 
32mm D (11 x 1-1/4”)
Weight: 680 g (1.5 lb)
           
 INSTALLATION
      Always use Teflon® tape or similar                 
      material on pipe threads when 
      making connections. Never use oil
      base pipe dopes or solvents.
      Remember you are installing an
      Instrument and fittings should be tightened
      only enough to prevent  leaking. Over
      tightening may result in  

 

      damage to the meter.
      Never hold the meter with pliers or 
      like tools during installation.
      Install the meter in an exactly vertical
      plane to obtain the best possible 
      reading.
      Whatever the installation 

      circumstances, meter should never 

      be allowed to support the weight of 

      The related pipe or tubing. 

         When installing the Fl46300 series
         meters, be certain of proper pipe
         alignment, misalignment will put 
         excessive stress on the meter.

MAINTENANCE
The “Exploded View” drawings illustrate 
assembly of the Fl46300 series meters. 
If your flowmeter needs to be cleaned,
refer to these drawing when 
reassembling the unit. The tapered tube
may be cleaned with a soft bottle brush.
Use a MILD soap and water solution for 
cleaning purpose. 

1

2

3

4

5

6

3

2

1

1

2

3

4

5

6

3

2

1

Parts

     

1. Adapters (2)

            

2. “O” Ring Seal (2)

           

3. Wire Holder (2)*

         4. Float (1)*

 

5. Guide Wire (1)

           

6. Meter Body (1)*

*Parts not available 

     

 need to buy a new unit.

Teflon® is a registered 

Trademark of DuPont. 

Viton® is a registered 

Trademark of DuPont Dow

Elastomers