Microboards Technology gx-1 用户手册
• Setting Printer Alignment
12
Setting Printer Alignment
Alignment
The GX-1 Disc Publisher system has been aligned at the factory. The factory alignment values are on
a label on the back of the GX-1 Disc Publisher. Follow these steps to enter the factory values:
a label on the back of the GX-1 Disc Publisher. Follow these steps to enter the factory values:
• Click on the Start Button on your
Windows computer.
• Select
Settings and then
Printers.
• Right click on the Microboards
GX Series icon.
• Select
Printing Preferences.
• Select
the
Utility Tab.
• Click on the .1mm selection in
the Resolution box.
• Enter the values listed with the
GX-1 Disc Publisher into the Top
and Left Side boxes.
and Left Side boxes.
• Click
the
Apply button.
• Click
the
OK button.
Print Test Disc
To confirm the computer is communicating with the GX-1 Disc Publisher, print a Test Disc. This can
be done with one of the inkjet printable CD’s included with your GX-1 Disc Publisher, or an inkjet
compatible disc you may already have. To print the Test Disc:
be done with one of the inkjet printable CD’s included with your GX-1 Disc Publisher, or an inkjet
compatible disc you may already have. To print the Test Disc:
• Place the inkjet printable
media into the input hopper.
• Launch the Zulu2 program
(see page 17).
• Once Zulu2 is running, select
the Robotic menu
• Select
Utilities
• Select
Print Test Disc.
• A disc will be dropped onto
the belts and then printed.
• Once printing is complete,
the disc will be ejected into
the output hopper.
the output hopper.
• If the alignment is OK,
proceed with your printing
project.
project.
• If not, go to Print Alignment
Disc.