Hitachi travelstar hds723020bla642 用户手册
7K200 SATA OEM Specification
154/173
14.39.6
Self-test log data structure
The following defines the 512 bytes that make up the Self-test log sector. All multi-byte fields
shown in these data structures follow the ATA/ATAPI-7 specifications for byte ordering.
shown in these data structures follow the ATA/ATAPI-7 specifications for byte ordering.
Description Bytes
Offset
Data structure revision
2
00h
Self-test number
1
n*18h+02h
Self-test execution status
1
n*18h+03h
Life time power on hours
2
n*18h+04h
Self-test failure check point
1
n*18h+06h
LBA of first failure
4
n*18h+07h
Vendor specific
15
n*18h+0Bh
...
Vendor specific
2
1FAh
Self-test log pointer
1
1FCh
Reserved
2 1FDh
Data structure checksum
1
1FFh
512
Note: n is 0 through 20
Table 121 Self-test log data structure
The data structure contains the descriptor of Self-test that the device has performed. Each
descriptor is 24 bytes long and the self-test data structure is capable to contain up to 21
descriptors.
After 21 descriptors has been recorded, the oldest descriptor will be overwritten with new
After 21 descriptors has been recorded, the oldest descriptor will be overwritten with new
descriptor.
Self-test log pointer points the most recent descriptor. When there is no descriptor the value is 0.
When there is descriptor(s) the value is 1 through 21.
When there is descriptor(s) the value is 1 through 21.