Hitachi travelstar hds723020bla642 用户手册

7K200 SATA OEM Specification

76/173

(Hex)

(S.M.A.R.T Function)

S.M.A.R.T. Read Attribute Values

S.M.A.R.T. Read Attribute Thresholds

S.M.A.R.T. Enable/Disable Attribute Autosave

S.M.A.R.T. Save Attribute Values

S.M.A.R.T. Execute Off-line Immediate

S.M.A.R.T. Read Log Sector

S.M.A.R.T. Write Log Sector

S.M.A.R.T. Enable Operations

S.M.A.R.T. Disable Operations

S.M.A.R.T. Return Status

S.M.A.R.T. Enable/Disable Automatic Off-line

(Set Features)

Enable Write Cache

Set Transfer Mode

Enable Advanced Power Management feature

Enable Power-Up in Standby feature

Power-Up in Standby feature device Spin-Up

Enable use of Serial ATA feature

Enable Automatic Acoustic Management (AAM)

Disable read look-ahead feature

Disable reverting to power on defaults

Disable write cache

Disable Advanced Power Management feature

Disable Power-Up in Standby feature

Disable use of Serial ATA feature

Enable read look-ahead feature

Disable AAM

Enable reverting to power on defaults

(Set Max security extension)

Set Max Set Password

Set Max Lock

Set Max Unlock

Set Max Freeze Lock

(Device Configuration Overlay)

Device Configuration Restore

Device Configuration Freeze Lock

Device Configuration Identify

Device Configuration Set

Table 42 Command Set (Subcommand)

“Table 40 Command set” on Page 74 shows the commands that are supported by the device. “ Table
42 Command Set (Subcommand)” on Page 76 shows the sub-commands that are supported by each

command or feature.
The following symbols are used in the command descriptions:

Output Registers
0

Indicates that the bit must be set to 0.

Indicates that the bit must be set to 1.

Head number. Indicates that the head number part of the Device Register is an output parameter and should
be specified.

LBA mode. Indicates the addressing mode. Zero specifies CHS mode and one does LBA addressing mode.