Crestron io sw-simpl 用户手册

Crestron SIMPL™ Windows

 Software

Crestron is now supporting Ethernet communications with the 2 Series and CNX 
generation control systems. Crestron e-Control™ support includes: 

•  System-to-system communication 

•  Allowing your web-browser or custom Visual Basic application to 

act like a Crestron touchpanel using Crestron e-Control Software 
Development Kit (SDK). 

•  Control of Ethernet-enabled Crestron devices (CEN models), such 

as the CEN-IO. 

•  Control of system diagnostics from the ViewPort via Ethernet. 

•  Serving Web Pages. 

•  Some router/firewall capability. 

NOTE: For additional details, refer to the latest revision of the Crestron e-Control 
Reference Guide (Doc. 6052). It can be obtained from the Docwnloads | Product 
Manuals section of the Crestron website (www.crestron.com). 

See your MIS department to determine whether or not your network meets these 
criteria. 

1.  Any PC designed to communicate to a Crestron device over Ethernet must 

support TCP/IP. 

2.  The CNX control system and CEN modules must have static IP addresses; 

they do not support DHCP servers or BOOTP servers. 

3.  CNX control system and CEN modules require a 10BaseT attachment. 

Running the SDK requires its own licensing fee, including the "CNX Gateway" 
running on an accessible network PC. This same PC may also need to run a web 
server in order to allow control via another PC using a web browser, depending on 
your system configuration.  

• 139