Crestron io sw-simpl 用户手册

Crestron SIMPL™ Windows

 Software

Programmers should refer to the Device Identification List in the Programming 
Design Kit, Job Design Specification, or other documentation that lists equipment 
that is to be controlled. 

Determine how the equipment is going to be controlled. 

Knowing how the various pieces of equipment are going to be controlled is very 
important.  This will let the programmer know what control devices (Network 
Module, Control Card, or other) will be necessary to control the equipment. 

For example: IR control devices require a CNXIR –8 plug-in card. 

Configure the system by building it in the Configuration Manager.  Locate the 
control system in the Device Library. Drag and drop the system into the System 
Views window. Complete the system configuration by adding interface devices, 
network modules, control cards, and other devices. All the necessary Crestron 
hardware should be included in your configuration. 

After the system is built by adding all the necessary Crestron hardware, begin 
programming the system by working in the Programming Manager. Program each 
button function from the system touchpanels or other user interface devices. Begin 
by naming the output signals from the user interface. Select the symbol(s) needed for 
the program in the Symbol Library. Drag and drop the symbols into the Program 
View window. Assign signal names to symbol inputs and outputs in the Detail View 
window. 

•  5