Hitachi cl2842s 用户手册

GB - 16 -

corresponding to the programme numbers you pass

through will not be tuned.
Pressing the RED button will tune the channel on the

flashing programme number. Now the colour of the

flashing programme number will be red. Again you can
use the or or

buttons.

To delete a channel from a programme number:
Move the flashing onto the channel you want to de-

lete.

Press the YELLOW button. Now the corresponding

channel will be deleted and all the other channels be-

low this programme number will be moved one

programme number up.

To insert a channel into a programme number:
Move the flashing onto the selected channel.
Press the RED button, so that channel will be dis-

played on the screen.

Move the flashing onto the selected programme num-

ber. Now pressing the GREEN button will insert the

channel on screen displayed into that programme

number. If a channel is moved to a lower programme

number, channels between the previous and current

position of the selected channel will be moved one

programme number up and if a channel is moved to a

upper programme number, channels between the

previous and current position of the selected channel

will be moved one programme number down.

APS (Automatic Programming System):
The APS menu will appear when you first switch on your

TV for the first time. APS automatically programmes

your TV, according to the transmission of programme

systems in your area.
If you want to run APS at any other time:
Press BLUE button. Now you are in the Auto Tune

menu.

Select Program menu using or button.
Press either the

button to enter the

Program menu.

In the program menu enter the Auto Tune menu by

pressing the BLUE button. Now a warning message

is displayed. If you do not want the channels to be

stored automatically, cancel by pressing the TV but-

ton. If you want to continue, start APS by pressing the

button.

After APS is finalised, a rank list will appear on the

screen. . In the rank list you will see the programme

numbers and names, assigned to the programmes.

First the programme with programme number 1 will be
displayed and it will be flashing. Using the or
or

buttons you can move the flashing

number and then display the programme corresponding

to that flashing number by pressing the RED button.
If you do not accept the line up between the programme

numbers and names and want to change them, press
the

button and then the BLUE button, so

entering the Installation menu. In the Installation menu

select the TUNING menu and enter it. To use the

TUNING menu, refer to the Tuning submenu in the

Installation Menu section of this manual.

TV Setup Menu
This menu is used to select the Menu Language, the

Country name and to select source of AV-2 Out

(Scart2).

Selecting Menu Language
To select menu language:
Press

button so that you enter the main

menu.

In the main menu select Installation using

button.

Open the installation menu pressing the

button . (To open the Installation Menu di-

rectly, do not enter the main menu but only press the

BLUE button).