Digitech gsp2101 用户手册
O
THER
C
ONNECTIONS
MIDI - The GSP-2101 Artist is MIDI savvy. Much of the 2101's flexibility can be accessed
remotely using MIDI, allowing you to focus more on your playing. The 2101 is complete with
the standard MIDI In, Out and Thru jacks on the rear of the unit (see figure 2-5). Connect a
MIDI controller (such as a MIDI sequencer, or perhaps a DigiTech MC
remotely using MIDI, allowing you to focus more on your playing. The 2101 is complete with
the standard MIDI In, Out and Thru jacks on the rear of the unit (see figure 2-5). Connect a
MIDI controller (such as a MIDI sequencer, or perhaps a DigiTech MC
2
continuous controller
pedal) to the MIDI In jack for remote or automated control of the 2101. MIDI System
Exclusive Data, Program Changes, and Continuous Control information can be sent from the
2101 using the MIDI Out jack. The MIDI Thru jack is used to pass along MIDI information
received at the MIDI In jack. MIDI information created by the 2101 can be Merged with incom-
ing data and passed to the MIDI Out jack, offering a second Thru option for your MIDI applica-
tions. Please see section 5 for more information concerning the 2101 and MIDI (pg. 63).
Exclusive Data, Program Changes, and Continuous Control information can be sent from the
2101 using the MIDI Out jack. The MIDI Thru jack is used to pass along MIDI information
received at the MIDI In jack. MIDI information created by the 2101 can be Merged with incom-
ing data and passed to the MIDI Out jack, offering a second Thru option for your MIDI applica-
tions. Please see section 5 for more information concerning the 2101 and MIDI (pg. 63).
Control One Foot Controller - DigiTech offers an optional pedalboard designed to get the most
out of your GSP-2101 Artist, called the Control One foot controller (see fig 2-3). The Control
One features 10 footswitches that can be programmed to select a new program, change banks, or
change parameter values. It also includes a built-in Expression Pedal for changing parameters in
real-time. The Control One is connected to the Foot Controller Input on the rear of the unit
(see figure 2-5).
out of your GSP-2101 Artist, called the Control One foot controller (see fig 2-3). The Control
One features 10 footswitches that can be programmed to select a new program, change banks, or
change parameter values. It also includes a built-in Expression Pedal for changing parameters in
real-time. The Control One is connected to the Foot Controller Input on the rear of the unit
(see figure 2-5).
WARNING: This jack supplies voltage to the Control One. Do not plug any device other
than the Control One into the Foot Controller Input jack.
The cable that connects the 2101 to the Control One uses 5-pin DIN connectors commonly
used by MIDI devices. Should the cable ever need replacing, a standard MIDI cable will do the
job, as long as all 5 pins are wired (MIDI only requires 3 active pins, but most MIDI cables wire
all 5).
used by MIDI devices. Should the cable ever need replacing, a standard MIDI cable will do the
job, as long as all 5 pins are wired (MIDI only requires 3 active pins, but most MIDI cables wire
all 5).
Fig 2-3
9
Section 2 - The Basics
GSP-2101 Artist Owner’s Manual
The Basics