Digitech gsp2101 用户手册
Adjustable Q equalizers offer the ability to control the bandwidth of the boost/cut ranges. High
Q settings (Q=8) yield extremely narrow bandwidths, where boost and cut have minimal effect
on frequencies adjacent to the center frequency. Fig. 3-4 shows how low Q settings affect a wider
number of frequencies when the selected band is boost or cut.
Q settings (Q=8) yield extremely narrow bandwidths, where boost and cut have minimal effect
on frequencies adjacent to the center frequency. Fig. 3-4 shows how low Q settings affect a wider
number of frequencies when the selected band is boost or cut.
Fig 3-4
With a Q setting of 2, you can see that a large number of frequencies are affected by boosting the
center frequency. Look at the middle and lower curves in the diagram. The curves with Q set-
ting of 4 and 8 have a much narrower bandwidth.
center frequency. Look at the middle and lower curves in the diagram. The curves with Q set-
ting of 4 and 8 have a much narrower bandwidth.
The cabinet emulator’s parameters are as follows:
Effect On / Off: Turns the Module on or off. When the cabinet emulation Module is
turned off, the sound continues to pass through the Module.
turned off, the sound continues to pass through the Module.
Type: There are 10 cabinet types that can be selected. They range from 1-Warm to 10-
MaxBndwidth. The maximum bandwidth setting is the same as having the cabinet emu-
lator module bypassed.
MaxBndwidth. The maximum bandwidth setting is the same as having the cabinet emu-
lator module bypassed.
100
1k
10k
20.000
DigiTech Audio Precision
STD AMPL (dBr) vs FREQ (Hz)
Q = 2
15.000
10.000
5.0000
0.0
-5.000
-10.00
-15.00
-20.00
Q = 4
Q = 8
21
Section 3 - Editing Effects
GSP-2101 Artist Owner’s Manual
Editing Effects