Digitech gsp2101 用户手册

Now let’s add the modules to a new Algorithm. Because we are using several effects at 
one time, managing the wet/dry relationship can be a little tricky. By handling it in 
DSP land, we can make each of the effects as wet or dry as we want. The master Wet to 
Dry mixer found in every program works globally with the effects used in a Program.

• Select a Program where you want this Algorithm to be used (remember after it is 

created, it can be used in several Programs).

• Press the [NEXT] button so that the Algorithm Select screen can be seen.

• Press the [ENTER] button to enter the Edit mode. The screen should look like this:

• Press the [2] button so that we can create a new Algorithm.

• Add the first FX Module. This is done by pressing the [REVERB] button (because the

first module is a reverb) and using the Data Wheel to locate the MVrb module. Press
[ENTER] to load the selected module into our new Algorithm.

• Repeat this process for the other modules. Add a SCho, Dly1, Pan (use the [MORE]

key to find this module), and a 5x2 mixer. Remember to press [ENTER] each time you
want to load the module into the new Algorithm.

• Verify that all the modules are loaded correctly by pressing the [1] key. This will show

you the Algorithm as it is loaded. The display should look like this:

• Press the [3] button to exit the Show Algorithm mode.

Now we are ready to Link the audio paths together according to our diagram. We are
going to let AutoLink do as much work as possible, but since our Algorithm is fairly
complex, we will probably need to reconnect a few things.

• Press the [LINK] button. The display will read:

Perform AutoLink?

Yes           No

¡             ™

MVrb SCho Dly1 Pan
5x2

Move            Exit

Edit Algorithm:
¡Modify Current Alg
™Create New Alg
£Exit Edit Mode

56

Section 4 - Algorithm Usage

GSP-2101 Artist Owner’s Manual

Algorithm Use