Digitech gsp2101 用户手册

• Press Function key [3]. The cursor moves to AS GSP PRG.

• Change the number to 131 using the Data wheel. When you’re finished, press [MIDI]

to exit.

Now, when the GSP-2101 Artist receives Program Change number 26 via MIDI, Program 131
will be recalled. Any number of Program Changes (up to the MIDI maximum of 128) can be
mapped to recall any GSP-2101 Artist Program.

This option determines whether or not corresponding Program Changes will be sent out the
GSP-2101 Artist MIDI Out port as you scroll through the Programs. This Parameter is set to
either YES or NO. The procedure is as follows:

• After entering the main MIDI setup menu, press the [NEXT] key four times. The dis-

play reads:

• To change the setting, press Function key [2]. When you’re finished, press the [MIDI]

button once to return to exit MIDI mode.

Device mapping allows the GSP-2101 Artist to act as a MIDI multiplexer for up to four other
devices. Here’s how it works: when the GSP-2101 Artist receives a Program Change message via
MIDI, each device you specify can receive independent Program Change messages on an indi-
vidual MIDI channels. This feature can allow you to have up to 32 MIDI channels (16 would be
downline from the GSP-2101 Artist, and 16 would be upline). 

To set up external devices for MIDI multiplexing:

• After entering the MIDI setup menu, press the [NEXT] key five times. The top line of

the display reads: 

• Press Function key [1]. A cursor appears under the DEVICE number.

• Using Function key [1], select the device number (1-4) you want to edit.

• Press [NAME] and identify the device with a custom name according to the standard

naming procedures found on pg. 16. When you're finished, press the [NAME] key
again, and the display returns to where you left off.

¡Device   1 CH 1
™GSP Program     1
£Send as         1
≤

¡MIDI merging    Off
™Send Front Panel

program change? No

≤                  ≥ 

64

Section 5 - The GSP-2101 and MIDI

GSP-2101 Artist Owner’s Manual

2101 & MIDI