Runco reflection vx-1000ci 用户手册

18

Picture Quality Adjustments

Main Menu

TINT
COLOR
BRIGHTNESS
CONTRAST
SHARPNESS
LUMA ENHANCE*
CHROMA ENHANCE*
COLOR TEMPERATURE*
COLOR BALANCE*

Picture quality adjustments are the controls that change different parameters of the image such as the
amount of color, black level, etc. While these adjustments can be set to suit the needs of the user,
there is a way to set these properly. This section will describe what each function does and how to
adjust them properly.

To access the Picture Quality Adjustments, press MENU, highlight the active source (indicated by the
arrow) and press ENTER. The picture quality sub-menu will then appear (see above).

To make an adjustment to a particular function, highlight the function with the up or down arrow 
buttons and press ENTER. Once the function is on-screen (i.e. brightness), pressing the UP arrow
button on the remote or front panel will increase the value of that function; pressing the DOWN arrow
on the remote or front panel will decrease the value of that function.

While each of the picture quality adjustments can be set to suit the needs of the user, there is a 
'proper' way to set the adjustments. For setting TINT and COLOR, please refer to the color bar test
pattern below.

NOTE: A BLUE FILTER must be used so only the blue color bars can be seen. Blue filters are provid-
ed with the Video Essentials or AVIA test DVDs.

white

yellow

cyan

green

magenta

red

blue

sub-menu

* Active only when the installation

mode is enabled (pg. 21).

Input Select

Composite
S-Video
Component

Component
RGB
DVI

Computer