Konica Minolta bizhub 160 161 um 1.1.0 用户手册
5
Using the utility mode
5-4
bizhub 160/161
5.1
Machine settings
From the MACHINE SETTING menu, various settings for the machine’s op-
erating environment can be specified. Refer to the following table for details
on each function.
erating environment can be specified. Refer to the following table for details
on each function.
No.
Name
Description
1
AUTO PANEL
RESET
RESET
Whether the auto panel reset function is disable or the time
(0.5 min, 1 min, 2 min, 3 min, 4 min, or 5 min) until the machine is
reset after finishing copying/printing or after performing the last
operation can be selected. If the auto panel reset function is ena-
bled, all functions are automatically reset to their default settings.
• Default setting: 1 min.
(0.5 min, 1 min, 2 min, 3 min, 4 min, or 5 min) until the machine is
reset after finishing copying/printing or after performing the last
operation can be selected. If the auto panel reset function is ena-
bled, all functions are automatically reset to their default settings.
• Default setting: 1 min.
2
ENERGY SAVE
MODE
MODE
If the machine performs no operations for a set length of time, it
will automatically enter the energy save mode. The length of time
until the machine enters energy save mode can be set between 1
and 240 min (in 1 min increments).
• Default setting: 15 min.
will automatically enter the energy save mode. The length of time
until the machine enters energy save mode can be set between 1
and 240 min (in 1 min increments).
• Default setting: 15 min.
3
DENSITY (ADF)
The scanning density when using the automatic document feeder
can be adjusted.
Mode 1:
For printing lighter copies of dark documents to avoid darkening
of copies.
Mode 2:
For printing copies with same density as documents.
• Default setting: Mode 1.
can be adjusted.
Mode 1:
For printing lighter copies of dark documents to avoid darkening
of copies.
Mode 2:
For printing copies with same density as documents.
• Default setting: Mode 1.
4
DENSITY (BOOK)
The density when scanning from the original glass can be adjust-
ed.
Mode 1:
For printing copies with same density as documents.
Mode 2:
For printing lighter copies of dark documents to avoid darkening
of copies.
• Default setting: Mode 1.
ed.
Mode 1:
For printing copies with same density as documents.
Mode 2:
For printing lighter copies of dark documents to avoid darkening
of copies.
• Default setting: Mode 1.
5
PRINT DENSITY
The copy/print density can be adjusted to one of six levels be-
tween –3 and +2. With the normal print density at 0, choose a
smaller number for a lighter print or choose a higher number for a
darker print.
• Default setting: 0 (Normal).
tween –3 and +2. With the normal print density at 0, choose a
smaller number for a lighter print or choose a higher number for a
darker print.
• Default setting: 0 (Normal).
6
LCD CONTRAST
The brightness of the display can be set to one of four levels be-
tween –1 and +2.
• Default setting: 0 (Normal).
tween –1 and +2.
• Default setting: 0 (Normal).
7
LANGUAGE
The display language can be selected.
• Default setting: English.
• Default setting: English.
8
LAMP OFF TIME
The time until the exposure lamp goes off can be adjusted.
Mode 1:
When four hours have passed since the last operation was per-
formed
Mode 2:
When the machine enters energy save mode
• Default setting: Mode 1.
Mode 1:
When four hours have passed since the last operation was per-
formed
Mode 2:
When the machine enters energy save mode
• Default setting: Mode 1.