Hotpoint bwm12 用户手册

BEFORE ATTEMPTING TO USE THE MACHINE, YOU MUST FOLLOW THE PROCEDURE DESCRIBED BELOW.

The inside of the appliance is supported, for transportation, by four screws on the back panel. Before

using the appliance these MUST be removed. NOTE: You may need a second person to help you.

Remove the screws , along with the

spacers together with the washers

intact.

You must now cover the holes with the

four plastic covers provided.

The choice of location for your appliance will influence its performance.

● Position where possible on a solid floor. Vibration may occur with a wooden floor.

● Take care with vinyl floor coverings. The weight of the appliance may cause indentations in some

vinyl floor coverings.

● You should not install your appliance on a carpeted floor, but if this is unavoidable, ensure that air 

can circulate around its base.

● If locating next to another appliance or an item of furniture, leave space between them to allow air 

to circulate.

● For your safety and to comply with IEE regulations, you should not install your appliance in a bath

or shower room. Seek professional advice if you wish to do so.

● Ensure sufficient space is allowed for the appliance.

● Ensure the electrical socket and water taps are easily accessible and that the water supply can be

isolated if necessary.

●  Risk of freezing: Do not position the appliance in rooms exposed to frost.

Frozen pipes may burst under pressure.

4

1.

2.

Important: Use the cap supplied to close the 3 holes which housed the plug, situated in the

right hand part of the lower back of the appliance.

WARNING:
● The appliance must not 

● Retain the transit