Honeywell MS-9200UDLSE 用户手册
Programming
Master Programming Level
70
MS-9200UDLS PN 52750:A 11/04/05
Type
To select the type of control module being programmed, press the 2 key while
viewing the Edit Control Screen #2. This will cause the control panel to display the
following Control Type Screens. Press the down arrow key to view additional
screens and selections.
To select the type of control module being programmed, press the 2 key while
viewing the Edit Control Screen #2. This will cause the control panel to display the
following Control Type Screens. Press the down arrow key to view additional
screens and selections.
While viewing one of the Control Type screens, select the type of control module
being programmed by pressing the corresponding keypad number key. The display
will return to the Edit Control Screen #2 and indicate the new type selection.
being programmed by pressing the corresponding keypad number key. The display
will return to the Edit Control Screen #2 and indicate the new type selection.
Note: A control module set to the Resettable Power type will follow the main circuit
board 24 VDC resettable power unless the control module is disabled.
board 24 VDC resettable power unless the control module is disabled.
The following table contains control module type codes and their functions which
are displayed in the Control Type screens:
are displayed in the Control Type screens:
Note: For HVAC SHUTDN description, refer to "Control Module Operation" on
page 179
page 179
Control Type
Special Function
Blank
None
Bell Circuit
None
Horn Circuit
None
Sounders
None
Relay
Ignore Open Circuit
Strobe Circuit
None
Control
None
Resettable Power
Relay Type - Ignore Open Circuit
HVAC SHUTDN
Relay Type - Ignore Open Circuit
EDIT CONTROL
1=ENABLED
2=TYPE
3=SILENCEABLE
1=ENABLED
2=TYPE
3=SILENCEABLE
Edit Control Screen #2
CONTROL TYPE
1=BLANK
2=BELL-CIRCUIT
3=HORN-CIRCUIT
1=BLANK
2=BELL-CIRCUIT
3=HORN-CIRCUIT
Control Type Screen #1