Omron 10 series + bp791it 用户手册

The monitor is designed to take measurements and store the
measurement values in the memory for two people using 
USER ID A and USER ID B.
The monitor can also be used to take a single measurement for other
persons using the GUEST Mode. The USER ID symbol is not displayed
when using the GUEST Mode. Measurements taken using the GUEST
Mode are not stored in the memory.

Contact your physician for specific information about your blood
pressure. Self-diagnosis and treatment using measured results may
be dangerous. Follow the instructions of your physician or licensed
healthcare provider.

Operate the device only as intended. Do not use the device for any
other purpose.

When you press the START/STOP button, the Calibration Check
System light turns on and the unit starts monitoring your readings
using dual sensors. If the unit is accurate and functioning correctly,
the Calibration Check System light remains lit during the
measurement. If an error is detected, the Calibration Check System
light flashes and “ER” will appear on the display.

This monitor checks whether the arm cuff is wrapped around the arm
correctly during the inflation. When the cuff is wrapped correctly, 

is

displayed while taking a measurement or using the memory function. If
the cuff is not wrapped correctly, 

is displayed. If 

is displayed,

refer to the section “Applying the Arm Cuff”, wrap the cuff firmly
around the arm and take another measurement.

30