Omron 10 series + bp791it 用户手册

1. Select your USER ID (A or B).

2. Press the START/STOP button.

All symbols appear on the display. The USER ID Symbol you
selected flashes on the display. The cuff starts to inflate automatically.

NOTE: To stop the inflation or measurement, press the START/STOP

button. The monitor will stop inflating, start deflating and will
turn off.

3. Inflation stops automatically and the measurement is started.

As the cuff deflates, decreasing numbers appear on the display. 

The Heartbeat Symbol (

) flashes at every heartbeat. When the

measurement is complete, the arm cuff completely deflates.

NOTE: Do not move your arm and remain still until the entire

measurement process is  completed.

4. Check the progress of the consecutive measurements.

NOTE: If a measurement fails, the monitor will repeat taking 

a measurement up to five times during the consecutive
measurement process.

The first measurement is complete, waiting to start the next
measurement. The interval of time set between each measurement will
appear on the display.

35