Morphy Richards ib25020 用户手册

下载
页码 2
Morphy Richards products are intended for household
use only. Morphy Richards has a policy of continuous
improvement in product quality and design. The
Company, therefore, reserves the right to change the
specification of its models at any time.
446/8005/11 Rev 1
Imported by : Morphy Richards Ltd, Talbot Road, Mexborough, S64 8AJ
Two year guarantee
It is in your interest to retain the retailers receipt as proof
of purchase. Please quote the model number if the
product develops a fault. This number can be found on
the base of the product.
All Morphy Richards products are individually tested
before leaving the factory. In the unlikely event of any
appliance proving to be faulty within 28 days of purchase
it should be returned to the place of purchase for it to be
replaced.
If a fault develops after 28 days and within 24 months of
original purchase, you should contact the helpline number
quoting the model number of the product, or write to the
address below. You will be asked to return the product (in
secure packaging) to the address below along with a copy
of proof of purchase.
The After Sales Division
Morphy Richards Ltd
Mexborough
South Yorkshire
England
S64 8AJ
Helpline (8:30-5:00 Mon-Thur/ 8:30-4:00 Fri)
UK 0870 060 2614
Replacement parts 0870 167 6645
Republic of Ireland 1800 409119
Morphy Richards Website
www.morphyrichards.co.uk
Wiring
This product is fitted with a 13A (BS1363) plug.
A 3 amp fuse (BS1362) must be used.
Check that the voltage on the rating plate of your
appliance corresponds with your house electricity
supply which must be A.C. (Alternating Current).
If the socket outlets in your home are not suitable for
the plug supplied with this appliance the plug should be
removed and the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED FROM THE
MAINS LEAD, IF SEVERED, MUST BE DESTROYED
AS A PLUG WITH BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A LIVE SOCKET
OUTLET.
Facial sauna
MODEL : 25020
Instructions
Mains lead
As a safety precaution and to prolong the life of your
appliance,  do not wrap the mains lead around the
appliance as this will cause damage.
Cleaning
Ensure the facial sauna is disconnected from the electrical
socket. Allow the unit to cool down and remove the mask
from the base unit. Pour out excess water from the tank
and wipe the mask with a damp cloth.