Omron r53 用户手册

下载
页码 2
Thank you for purchasing the OMRON RS3 Wrist Blood Pressure 
Monitor.
The OMRON RS3 is a compact and easy to use blood pressure 
monitor, operating on the oscillometric principle. It measures your 
blood pressure and pulse rate simply and quickly. For comfortable 
controlled inflation without the need of pressure pre-setting or 
re-inflation the device uses its advanced “IntelliSense” technology.
Intended Use
This product is designed to measure the blood pressure and pulse 
rate of people within the range of the designated wrist cuff, following 
the instructions in this instruction manual.
It is mainly designed for general household use. Please read the 
Important Safety Information in this instruction manual before using 
the unit.
Please read this instruction manual thoroughly before using the 
unit.
Please keep for future reference.
For specific information about your own blood pressure, 
CONSULT YOUR DOCTOR.
Consult your doctor prior to using in pregnancy or if diagnosed with 
arrhythmia or arteriosclerosis.
Please read this section carefully before using the unit.
Warning:
• Indicates a potentially hazardous situation which, if not avoided, 
could result in death or serious injury.
(General Usage)
• Always consult your doctor. Self-diagnosis of measurement results 
and self-treatment are dangerous.
• People with severe blood flow problems, or blood disorders, should 
consult a doctor before using the unit, as cuff inflation can cause 
internal bleeding.
(Battery Usage)
• If battery fluid should get in your eyes, immediately rinse with 
plenty of clean water. Consult a doctor immediately.
Caution: 
• Indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury to the user or patient or 
damage to the equipment or other property.
(General Usage)
• Do not leave the unit unattended with infants or persons who 
cannot express their consent.
• Do not use the unit for any purpose other than measuring blood 
pressure.
• Do not use a mobile phone or other devices that emit 
electromagnetic fields, near the unit. This may result in incorrect 
operation of the unit.
• Do not disassemble the unit or wrist cuff.
• Do not operate the unit in a moving vehicle (car, airplane).
(Battery Usage)
• If battery fluid should get on your skin or clothing, immediately rinse 
with plenty of clean water.
• Use only two “AAA” alkaline (LR03) batteries with this unit.
• Do not insert the batteries with their polarities incorrectly aligned.
• Replace old batteries with new ones immediately. Replace both 
batteries at the same time.
• Remove the batteries if the unit will not be used for three months or 
more.
• Do not use new and used batteries together.
General Precautions
• Do not apply strong shocks and vibrations to or drop the unit.
• Do not take measurements after bathing, drinking alcohol or 
caffeine, smoking, exercising or eating.
• Do not inflate the wrist cuff when it is not wrapped around your 
wrist.
• Read and follow the “Important information regarding Electro 
Magnetic Compatibility (EMC)” in the Technical Data Section.
• Read and follow the “Correct Disposal of This Product” in the 
Technical Data Section when disposing of the device and any used 
accessories or optional parts.
Main unit:
Display:
2.1  Installing/Replacing the Batteries
• If the battery low symbol (
) appears on the display, turn off 
the unit then replace both batteries at the same time.
• The measurement values continue to be stored in memory 
even after the batteries are replaced.
Disposal of used batteries should be carried out in accordance 
with the national regulations for the disposal of batteries.
2.2  Setting the Date and Time
Notes:
• If the batteries have been removed, the date and time setting 
will need to be reset.
• If the date and time are not set, “-:--” appears during or after 
measurement.
3.1  Applying the Wrist Cuff
Do not apply over clothing.
3.2  How to Sit Correctly
• Relax your wrist and hand. Do not bend your wrist back, clench 
your fist, or bend your wrist forward.
3.3  Taking a Reading
Notes:
• To cancel a measurement, press the START/STOP button at 
any time during measurement.
• Remain still while taking a measurement.
Cuff Wrapping Guide
The Cuff Wrapping Guide is a unique feature that 
indicates if the cuff is not wrapped tightly enough 
around the wrist. Even when the
 
 
is displayed, a 
blood pressure reading will be taken.
Note: This reading is NOT reliable due to the incorrect 
wrapping of the cuff. Please wrap the cuff again, taking 
care to wrap it correctly and take the measurement 
again. When the 
 is displayed, the cuff is correctly 
wrapped tightly enough on the wrist and the reading is 
accurate and reliable.
The monitor automatically stores the measurement in its 
memory.
It will automatically turn off after two minutes.
This criteria is for home blood pressure measurement.
If the irregular heartbeats cause the measurement to be 
invalid, no result is shown. If the irregular heartbeat symbol 
(
) is shown after you have taken a measurement, repeat 
the measurement. If the irregular heartbeat symbol (
) is 
shown frequently, please make your doctor aware of it.
Notes:
• Wait 2 - 3 minutes before taking another blood 
pressure measurement. Waiting between readings 
allows the arteries to return to the condition prior to 
taking the blood pressure measurement.
• The blood pressure can differ between the right arm 
and the left arm, and therefore also the measured 
blood pressure values can be different. OMRON 
recommends to always use the same arm for 
measurement. If the values between the two arms 
differ substantially, please check with your physician 
which arm to use for your measurement.
 Warning:
Self-diagnosis of measured results and treatment are 
dangerous. Please follow the instructions of your doctor.
A. Wrist cuff
D. Memory (
) button
B. Battery compartment
E. Date/Time setting (
) button
C. Display
F. START/STOP button
Wrist Blood 
Pressure Monitor
Model RS3
Instruction Manual
IM-HEM-6130-E-02-01/2013
5338830-7B
Introduction
Important Safety Information
1.  Overview
A
E
F
C
D
B
G. Memory symbol
H. Systolic blood pressure
I. Diastolic blood pressure
J. Battery low symbol
K. Heartbeat symbol 
(Flashes during measurement)
L. Average value symbol
M. Date/Time display
N. Blood pressure level indicator
O. Pulse display and Memory 
number
P. Deflation symbol
Q. Cuff wrapping guide
R. Movement error symbol
S. Irregular heartbeat symbol
1.
Remove the battery cover.
 
2.
Insert two 1.5V “AAA” 
alkaline (LR03) batteries 
as indicated in the battery 
compartment and then 
replace the battery cover.
Notes:
 
1.
Press and hold the 
 button until the year 
flashes on the display.
2.
Set the monitor to the correct date and time 
before taking a measurement for the first time.
3.
Press the START/STOP button to store the 
setting.
1.
Place the wrist cuff over 
your wrist.
Your palm should face upward.
 
2.
Wrap the wrist cuff around 
your wrist.
Wrap the wrist cuff securely 
around the wrist for taking 
accurate measurements.
 
Make sure that the wrist cuff 
does not cover the protruding 
part of the wrist bone (ulna) on 
the outside of the wrist.
Note: You can take a 
measurement on either 
your left or right wrist.
 
H
I
G
J
K
O
P
L
M
N
Q
R
S
2.  Preparation
Year
Month
Day
Hour
Minute
1) Push the 
 button to change.
• Hold down to advance the digit 
rapidly.
2) Push the 
 button to confirm.
• Next setting appears.
3.  Using the Unit
To take a measurement, you need 
to be relaxed and comfortably 
seated, under comfortable room 
temperature. No bathing, drinking 
alcohol or caffeine, smoking, 
exercising or eating 30 minutes 
before taking a measurement.
• Sit on a chair with your feet flat on the 
floor.
• Sit upright with your back straight.
• The cuff should be at the same level 
as your heart.
 
1.
Press the START/STOP button.
All the symbols appear on the display.
The wrist cuff will start to inflate automatically.
2.
Undo the wrist cuff and remove the unit.
3.
Press the START/STOP button to turn off the 
monitor.
Important:
• Recent research suggests that the 
following values can be used as a 
guide to high blood pressure for 
measurements taken at home.
Systolic Blood Pressure
Above 135 mmHg
Diastolic Blood Pressure
Above 85 mmHg
• Your blood pressure monitor includes an 
irregular heartbeat feature. Irregular 
heartbeats can influence the results of the 
measurement. The irregular heartbeat 
algorithm automatically determines if the 
measurement is usable or needs to be 
repeated. If the measurement results are 
affected by irregular heartbeats but the result 
is valid, the result is shown together with the 
irregular heartbeat symbol (
). 
• If you move during measurement,  the 
movement error symbol (
) will appear on 
the display. Keep still and repeat the 
measurement.
Cuff Wrapping Guide
START
INFLATE
DEFLATE
COMPLETE
Alternating
date/time display