Honeywell equip hd3mdihx 用户手册

Document 800-07361 Rev A

35

12/10

When you log on to the IP Utility, the devices on the network—including the devices on 
other subnets—are automatically discovered and are listed in the Discovery pane. After the 
initial discovery, auto-refresh continues to discover devices that are newly added to the 
network.

You can also manually refresh the device discovery by clicking the Discovery icon (

), 

located near the top of the Discovery pane.

Before configuring the IP network settings, you must connect to the IP device.

You can connect to individual Web-Client applications for each discovered device.
•

In  the  Discovery pane, double-click the device to which you want to connect.
-OR-

•

Select the device and click the Connect  

button. 

The network settings for the connected device are displayed in the System pane.

In the Discovery pane, select the device and click Disconnect 

.

If you disconnect the device without saving configuration details, a warning 
dialog box displays. Click Yes to save and disconnect, or click Cancel to 
discard the changes and disconnect the device.

When you see the Limited/No connectivity 

 button, you cannot fully 

connect to the device because the discovered device is on a different subnet 
from your PC. Check your network settings for both the device and your PC to 
resolve this issue. Consult your network administrator for additional support.