Frigidaire 134897500b 用户手册

8

               

 The following are specific requirements  for

proper and safe electrical installation of your laundry center.
Failure to follow these instructions can create electrical shock
and/or a fire hazard.

  This appliance MUST be properly grounded.

Electrical shock can result if the laundry center is not properly
grounded. Follow the instructions in this manual for proper
grounding.

                              Do not use an extension cord with this
laundry center. Some extension cords are not designed to
withstand the amounts of electrical current this laundry center
utilizes and can melt, creating electrical shock and/or fire hazard.
Locate the laundry center within reach of the receptacle for the
length power cord to be purchased, allowing some slack in the
cord. Refer to the pre-installation requirements in this manual
for the proper power cord to be purchased.

       A U.L. approved strain relief must be

installed onto power cord. If the strain relief is not attached, the
cord can be pulled out of the laundry center and can be cut by
any movement of the cord, resulting in electrical shock.

                           Do not use an aluminum wired receptacle
with a copper Wired power cord and plug (or vice versa). A
chemical reaction occurs between copper and aluminum and
can cause electrical shorts.

NOTE: Laundry centers operating on a 208 volt power supply
will have longer drying times than laundry centers operating on
a 240 volt power supply.

   Improper connection of the equipment

grounding conductor can result in a risk of electrical shock.
Check with a licensed electrician if you are in doubt as to whether
the appliance is properly grounded.

For a grounded, cord-connected laundry center:
1. The laundry center MUST  be grounded. In the event of

malfunction or breakdown, grounding will reduce the risk of
electrical shock by a path of least resistance for electrical
current.

2. If your laundry center is equipped with a power supply cord

having an equipment-grounding conductor and a grounding
plug, the plug MUST be plugged into an appropriate, copper
wired receptacle that is properly installed and grounded in
accordance with all local codes and ordinances. If in doubt,
call a licensed electrician.  Do not modify plug provided
with the appliance.

For a permanently connected laundry center:
The laundry center MUST be connected to a grounded metal,
permanent wiring system; or an equipment grounding conductor
MUST be run with the circuit conductors and connected to the
equipment-grounding terminal or lead on the appliance.

 

Improper connection of the equipment

grounding conductor can result in a risk of electrical shock.
Check with a licensed electrician if you are in doubt as to
whether the appliance is properly grounded.

For a grounded cord connected laundry center:
1. The laundry center MUST  be grounded. In the event of

malfunction or breakdown, grounding will reduce the risk of
electrical shock by providing a path of least resistance

for

the electrical current.

2. Since your laundry center is equipped with a power supply

cord having an equipment-grounding conductor and a
grounding plug, the plug MUST  be plugged into an
appropriate outlet that is properly installed and grounded in
accordance with all codes and ordinances. If in doubt, call a
licensed electrician.

1. The laundry center is equipped with a three-prong (grounding)

plug for your protection against shock hazard and should
be plugged directly into a properly grounded three-prong
receptacle. Do not cut or remove the grounding prong from
the plug.

DANGER

DANGER