Haier hlp21n 用户手册

English

The bottom panel blocks noises to provide you with the quietest performance 
possible during the wash cycle operation. 

1. First, lay down the washer on its front side.

2.  Place the panel against the bottom of the machine.

Align the holes in the panel with the holes in the
washer.

NOTE: Please ensure that the bottom plate
is positioned properly before permanently 
screwing to bottom of the washer.

The side marked "face to floor" must be 
facing you when putting the screws in. 
The end marked "front" must be aligned 
with front of the washing machine.

     WARNING:  Not facing the bottom plate properly or aligning the bottom 

plate to the front of washer will cause damage to washer!

 

 

 

 

FRONT

FRONT

FACE TO FLOOR

3.  Insert the screws through the holes of the panel into the bottom of the washer 

and tighten. (6 screws are supplied.)

4.  Once all screws have been installed and the panel is in place, return the 

washer to its standing position.

Note:  During this time, you may reroute the drain hose to the left or right side 

for draining. Just remove hose clamp and snake to other side, then 
re-insert hose to other side.

FRONT