Kompernass parkside pebs 900-2002-kh 3115 belt sander 用户手册
PEBS 900 BELT SANDER
For sanding large areas. For wood, plastic and metal
Please read carefully through the following information concerning safety and proper use. Before reading, fold out the page with the
illustrations and make yourself familiar with all the functions of the equipment. Please read the operating instructions below and
the accompanying safety advice carefully. Use the equipment only as described and for the indicated purposes. By doing this you will be
able to work in complete safety and produce better results.
Be careful to keep these advice notes and if necessary pass them on to a third party.
illustrations and make yourself familiar with all the functions of the equipment. Please read the operating instructions below and
the accompanying safety advice carefully. Use the equipment only as described and for the indicated purposes. By doing this you will be
able to work in complete safety and produce better results.
Be careful to keep these advice notes and if necessary pass them on to a third party.
FEATURES OF THE PEBS 900
Auxiliary handle
Protective cover
Ventilation slots
Dust extraction spout
Belt speed selector wheel
Belt adjuster screw
Locking knob
Tensioning lever
ON / OFF switch
Dust collection bag
TECHNICAL INFORMATION
Rated consumption:
900 W
Protection class:
II
Nominal voltage:
230 V ~ 50 Hz
Belt no load speed:
650 rpm
Weight:
3.8 kg
Belt /sanding speed
Sound pressure level:
Lp = 87 dB (A)
at maximum speed:
350 m/min
Sound output level:
Lw = 100 dB (pw)
Abrasive surface:
75 x 150 mm
Vibration:
< 2.5 m/s
2
(Hand-arm vibration)
Belt:
75 x 533 mm
The PEBS 900 belt sander has full-wave electronics with additional control electronics, overload control, soft start and power control.
Soft start with inrush current limiting.
IMPORTANT SAFETY ADVICE
In addition, please read the advice in the accompanying booklet called "Safety advice" before using the equipment for the first time.
The PEBS 900 belt sander is designed for dry sanding of large surfaces of wood, plastic, metal and – with increased removal rate – plaster
and painted surfaces. The belt sander is only to be used for dry sanding.
and painted surfaces. The belt sander is only to be used for dry sanding.
If the mains cable becomes damaged or cut through whilst you are working, never touch the cable - pull the plug out of the mains socket
immediately. Never use electrical equipment with a damaged mains cable.
immediately. Never use electrical equipment with a damaged mains cable.
When working always keep the cable running away from the back of the machine.
n0
4