Korg triton-rack 信息指南

●

Each mode has a large number of parameters, which 
are grouped into pages. Each page is further divided 
into as many as seven groups. These are referred to as 
“tabs.”

1 Make sure that the desired mode is selected.

To select a mode, press the appropriate mode key 
([COMBI] – [DISK]). Here we will use Combination 
mode as an example for our explanation. Press the 
[COMBI] key.

2 Press the [MENU] key.

The page menu will appear.

In Disk mode there is only one page, so the page 
menu will not appear.

3 Press the function key [F1]–[F7] that is nearest the 

If multiple pages are assigned to one function key, 
press the same key to move the cursor downward. 
You can also use the [

], [

], [

], [

] cursor keys 

to move.

4 Press the [F8] (“Open”) key.

When you press the [F8] key, you will jump to the 
selected page, and that page will appear.

As an example here, press the [F3] key three times to 
select “KeyZ,” and then press the [F8] (“Open”) key. 
The 3.3: Ed-Key Zone page will appear.

You can also use the following alternative methods 
to select a page.

• Press the [MENU] key, and then use the [

], [

] 

keys to move forward or backward through the 
pages in the order of 1.1

→

2.1

→

2.2

→

2.3 etc.

• Hold down the [MENU] key, and use numeric keys 

[0]–[9] to enter a two-digit page number to move 
directly to the corresponding page. (To select the 
page shown above, you would press [3], [3].) 

The page selected at this time will be the page that was 
last selected. If there is no corresponding page, nothing 
will happen.

When you press the [EXIT] key, you will return to 
1.1 from any page.

5 Press the function key [F1]–[F7] that is nearest the 

As an example here, we will select the “Review” tab. 
Press the [F5] key.

• Some pages have no tabs.

6 To move to another page, press the [MENU] key 

and repeat the procedure from step 3.