Konica Minolta magicolor 2450 用户手册
Dual In-Line Memory Module (DIMM)
135
Dual In-Line Memory Module (DIMM)
"
You may need additional memory (DIMM) for complex graphics and
for duplex printing.
for duplex printing.
A dual in-line memory module (or DIMM) is a compact circuit board with sur-
face-mount memory chips.
Your printer comes with 128 MB SDRAM printer memory on board. However,
you can upgrade to a maximum of 640 MB of RAM through the installation
face-mount memory chips.
Your printer comes with 128 MB SDRAM printer memory on board. However,
you can upgrade to a maximum of 640 MB of RAM through the installation
of an additional unbuffered SDRAM DIMM. Your printer comes with one free
DIMM slot.
DIMM slot.
Installing a DIMM
Note
It’s very important to protect the printer controller board and any
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on Page 134. In addition,
always handle circuit boards by the edges only.
associated circuit boards from electrostatic damage. Before performing
this procedure, review the antistatic caution on Page 134. In addition,
always handle circuit boards by the edges only.
1
Turn off the printer and discon-
nect the power cord and inter-
face cables.
nect the power cord and inter-
face cables.
"
If the duplex option is
installed, remove it.
installed, remove it.
2
Using a screwdriver, remove the
screw on the back of the printer.
screw on the back of the printer.