Konica Minolta 7145 network scanner 用户手册
4-4. NetWare Setup
II Network Setup - Administrators only
34
Chapter 4 Setting from the Control Panel
NetWare setup (Part 1 of 3)
1
Access to [NetWare Setup] screen (1/3) from [Network setting] screen.
z
For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Control Panel] (
Page 23).
z
Use [
] and [
] to switch the screen.
Enable NetWare
This sets whether or not to enable the machine’s NetWare capabilities in the network environment.
1
To disable NetWare settings, touch the [OFF] key. To enable them touch the [ON] key.
[ON]
[ON]
:Used in the NetWare environment
[OFF] :Not used in the NetWare environment
Ethernet Frame Type
This sets the frame type used by the machine.
1
Touch the [EDIT] key on the [Ethernet Frame Type] screen.
[Auto-Sense] :Automatic
[Auto-Sense] :Automatic
Setup
[EDIT]
:Choose from below
[Auto-Sense]
[Auto-Sense]
→[802.2]→[802.3]→[Ethernet II]→[802.2 SNMP]→[Auto-Sense]
z
The factory default is [Auto-Sense].
2
Touch [OK] key.
Print Server Name
This sets the Print Server name assigned to the Network Controller.
1
Touch the [Print Server Name] key.
2
Using the [Data Input] screen, input the Print Server name.
3
Touch [OK] key.
→ The screen will return to [NetWare Setup].
→ The screen will return to [NetWare Setup].