Konica Minolta dimage e323 用户手册

Place the subject within the LCD monitor or viewfinder. The focus range is 50cm (1.6ft) to infinity.
Both the LCD monitor and viewfinder can be used to frame the subject. However, because of paral-
lax, only the monitor’s live image will be accurate with subjects closer than 1m (3ft.) at the zoom lens’
wide-angle position or 3m (10ft) at the telephoto position. The focus-lock function can be used (p. 28).

Press the shutter-release button partway down (1) to lock the focus
and exposure.
• The focus signal and focus frame will

appear on the monitor to show the
image is in focus. If they do not appear,
the camera was unable to focus on the
subject. Repeat the previous steps until
they appear on the monitor. The shutter
can be released regardless of whether
the camera can focus on the subject or not.

The image can be previewed after it is captured by pressing the central button of the controller.

26

SINGLE-FRAME ADVANCE RECORDING MODE

See page 22 to set the single-frame advance mode.

Press the shutter-release button all the way down (2) to take the pic-
ture.
• After the shutter releases, the indicator

lamp next to the viewfinder will turn orange
indicating image data is being written to the
memory card. Never remove a memory
card while data is being transferred.