Konica Minolta di181f 用户手册

下载
页码 70
Troubleshooting
7
Rev. /
Di181f
7-61
7.2
Error Codes
Error 
code
Problem
Solution
10
No answer
Check the telephone line. Ensure the 
receiving fax is operational.
11
The number dialled is a standard 
telephone number.
Enter the fax number.
20
The transmission was interrupted by 
the recipient.
21
Error during 1 page TX.
Resend.
25
Memory error
Ensure that enough memory is 
available. Delete files which are no 
longer needed.
26
ECM error
Call the technical service.
29
The transmission was interrupted or 
the machine was disconnected from 
the mains.
30 - 36
Poor print quality
Reduce the modem speed to 9600 bps.
40
The receiving fax machine has run out 
of paper or has insufficient memory.
Inform the recipient.
41
Polling reception failed because 
document had not been fed correctly 
into the feeder.
Inform the recipient.
44
ECM error
Call the technical service.
45
No loop current.
Check the telephone line.
46
Other location busy.
Resend later.
47
Rings fail to be recognised.
Check the telephone line.
48
The other location does not respond.
Inform the recipient.
49
Engaged tone is heard before the 
number has been dialled.
Check the telephone line. Resend later.
50 - 60
A connection cannot be established 
due to the poor telephone line.
Reduce the modem speed to 9600 bps.
71
Wrong password
Check the sub-address ID and the 
password for selective polling.
72
The receiving fax machine does not 
have the polling function.
75
A polling signal has been received, but 
the machine is not set to polling RX.
Set the machine to polling RX.
79
The receiving fax machine does not 
have the mailbox function.
FE, FF
Switch the machine off and then on. If 
the problem persists, contact the 
technical service.