Konica Minolta cf2002 3102 printer 1.1.0 用户手册
4
4.5 Loading Paper
4-16
CF2002/CF3102
Loadi
ng P
a
p
e
r
Ch
apt
e
r 4
5
Load the paper into the drawer so
that the side of the paper to be
printed onto (the side facing up
when the package was un-
wrapped) faces up.
that the side of the paper to be
printed onto (the side facing up
when the package was un-
wrapped) faces up.
Note
If the paper is curled, flatten it
before loading it.
If the paper is curled, flatten it
before loading it.
Do not load so much paper that the top of the stack is higher than the
o
mark.
Paper other than plain paper cannot be fed from the 2nd drawer or optional
paper feed units.
If you wish to make prints onto paper other than plain paper, feed it through
the manual bypass tray or the 1st drawer.
paper feed units.
If you wish to make prints onto paper other than plain paper, feed it through
the manual bypass tray or the 1st drawer.
When loading additional paper, remove any paper remaining in the drawer,
place it on top of the new paper, and then align the paper in the stack well
before loading it into the drawer. If the paper is not aligned well, a paper mis-
feed may occur. We recommend replenishing the paper only after all of the
paper in the drawer has been used.
place it on top of the new paper, and then align the paper in the stack well
before loading it into the drawer. If the paper is not aligned well, a paper mis-
feed may occur. We recommend replenishing the paper only after all of the
paper in the drawer has been used.
6
Close the paper drawer.