Hoyt recurve-2006 用户手册
BOW ASSEMBLY
Installing Limbs
All Hoyt competition recurve bows use the patented Hoyt dove-
tail mounting system. This reliable and proven system is quite
simple:
tail mounting system. This reliable and proven system is quite
simple:
1. Carefully align the limb dovetail bushing with the correspon-
ding slot in the riser pocket. Push the limb into the locket until
the detent button engages. You will feel or hear a light “click”
when this occurs, and the limb will stay in place under its own
weight when fully seated. It is normal at this stage for there to
be considerable movement possible with the limb.
ding slot in the riser pocket. Push the limb into the locket until
the detent button engages. You will feel or hear a light “click”
when this occurs, and the limb will stay in place under its own
weight when fully seated. It is normal at this stage for there to
be considerable movement possible with the limb.
2. String the bow using a bow stringer.
3. Pull the bowstring about two inches and let go to “seat” the
limbs. This completes the assembly procedure.
3. Pull the bowstring about two inches and let go to “seat” the
limbs. This completes the assembly procedure.
5
Weight/Tiller Adjust Bolt
Standard Hoyt
Dovetail (A)
Limb Butt
Pocket
Weight/Tiller Adjust Bolt
Weight/Tiller Locking Screw
Standard Hoyt
Dovetail (B)